Flexible LED ribbon lights for indoor or outdoor application
33?, 82′ and 164′ LED lighting kit includes:
Flexible LED strip 7/16? wide, 1 two foot factory sealed power cord, 1 end cap, 20, 50 or 100 mounting clips.
Note: This product is factory sealed and UL approved. This LED lights can be cut and therefore extra power cords and end caps are available for separate purchase. LED can be cut approximately every 20″
LED Ribbon lighting?Product Highlights
– 120 V flexible LED ribbon;
– Rated for 30,000 hours;
-?No additional transformer needed;
– Can run up to 164 feet on one power cord;
-?Field cuttable and connectable;
– cuttable every 20″; cutting voids warranty
– LED’s encased with flexible PVC;
– Comes in several colors including: warm white, cool white, blue, red and green;
– Comes in 3 lengths 33ft, 82ft and 164 feet;
– Comes in 2 light intensities,?normal light output?up to 152 lumens and?high light output?up to 320 lumens
note: *cool white
– Color Temperature: CW – 6,500k
– Color Temperature: WW -3,000k
– Beam Spread: 120 degrees
– Consistent binning/color;
– Color rendering index[CRI]: CW = 80, WW = 80
Normal light?output standard features:
– ?33 feet ? 60 watts 600 LED chips embedded in flexible PVC;
– ?82 feet ? 148 watts 1500 LED chips embedded in flexible PVC;
– ?164 feet ? 295 watts 3000 LED chips embedded in flexible PVC;
– kit includes: power cord, end cap and 50 or 100 mounting clips;
-?cool white?up to152 lumens per foot;?Color 6500K, CRI 80
-?warm white?up to 152 lumens per foot;?Color 3000K, CRI 80
High light?output standard features:
– ?33 feet ? 103 watts 1400 LED chips embedded in flexible PVC;
– ?82 feet ? 256 watts 3500 LED chips embedded in flexible PVC;
– ?164 feet ?512 watts 7000 LED chips embedded in flexible PVC;
– kit includes: power cord, end cap and 50 or 100 mounting clips;
-?cool white?up to 320 lumens per foot; Color 6500K, CRI 80
-?warm white?up to 320 lumens per foot;?Color 3000K, CRI 80
options:
power cord
splicer
end cap
mounting clips
2 way L-connector
3-way T-connector
LED ribbon mounting channel
Safety and Warranty Notes:
1. Note*: Remember do not leave 120V ribbon flex LED plugged in for more than one minute while on shipping spool, as damage may occur;
2. When planning your installation, it is recommended you review your plans with a licensed electrician. It is strongly recommended that you read the installation booklet before installing your LED lights;
3. Limited warranty – 1 year. No returns, refund on cut products;
4. Warning: If using 120V Ribbon Flex outdoors, be sure to use waterproof PVC or silicon to secure all connections and power cord.
5.? Blue, green and red color options available.? Call 781.444.8001 to place a custom order.
Reviews
There are no reviews yet.